Search: Driveline and Axles
- 8.0 in. Ring Gear Dia.; 30 Spline; 1.31 in. Axle Shaft Diameter; All Ratios
- For Use w/10 Bolt Ring Gear Design~Fits 8.0 in. Ring Gear~For Automatic Transmission Not Equipped w/Factory Locker
$1,648.04 USD
- Dana 44; 8.3/8.7 in. Ring Gear Dia.; 1.41 in. Shaft Diameter; 32 Spline; All Ratios
- The Stator Must Be Removed For Clearance Prior To Installing Ring Gear~Must Be Reinstalled In Order [1]Ring Gear; [2]Stator; [3]Bearing~Factory 3.73 Gear Req. Replacement M220 Jeep JL Ring and Pinion
$1,648.04 USD
- 28 Spline; 1.20 in. Axle Shaft Diameter; Rear 8.8 in.; All Ratios
$770.31 USD
- 27 Spline; Dana 30; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; 7.2 in.
- Bearing LM102949 and Race LM102911 And Outboard Shims Required
$1,509.82 USD
- 28 Spline; 1.20 in. Axle Shaft Diameter; 3.23 And Up Ring Gear Pinion Ratio; 7.5 in./7.625 in.
$718.52 USD
- 27 Spline; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; Dana 35
$723.23 USD
- 27 Spline; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Rear; Dana 30/Reverse; Applies To Non-Disconnect Only
- Applies to Non-Axle Disconnect Style Housings Only
$718.52 USD
- 30 Spline; 1.30 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Also Fits GM Half Ton Truck
$832.68 USD
- 34 Spline; 1.37 in. Axle Shaft Diameter; All Ratios; Rear 9.75 in.
$924.49 USD
- 30 Spline; 1.32 in. Axle Shaft Diameter; 2.73 And Up Ring Gear Pinion Ratio; Rear 8.5 in./8.6 in.
- For Axles w/Small bearing Bores Race O.D. 2.89 in. LM102949/LM102911 Req.~Axles w/Large Bearing Bores Race O.D. 3.06 in. LM603049/LM603012 Req.
$753.82 USD
- 30 Spline; 1.29 in. Axle Shaft Diameter; 3.08 - 3.90 Ring Gear Pinion Ratio; Rear 8.875 in.
- Designed To Fit Axles Cut w/45 Deg. Pressure Angles
$799.73 USD
- 31 Spline; 1.32 in. Axle Shaft Diameter; 8.8 in.
$836.20 USD
- 31 Spline; Rear 9.0 in.; 1.32 in. Axle Shaft Diameter; 3.25 And Up Ring Gear Pinion Ratio
$765.61 USD
- 30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Rear Dana 44
- For Use/Non-Thick Ring Gears Only
$777.37 USD
- 33 Spline; 1.37 in. Axle Shaft Diameter; 9.5 in.
$906.82 USD
- GM 10.5 in.; 14 Bolt; 30 Spline; 4.10 And Down Ring Gear Pinion Ratio; 1.50 in. Axle Shaft Diameter
$1,130.45 USD
- 35 Spline; 1.50 in. Axle Shaft Diameter; Full Float Only; Rear 10.25 in./10.5 in.
- Full Float Applicators Only
$989.22 USD